Kingston 128GB (4X32GB) DDR4 PC4-17000C15 2133MHZ ECC QUAD CHANNEL MEMORY KIT (KVR21R15D4K4/128) View larger

Kingston 128GB (4X32GB) DDR4 PC4-17000C15 2133MHZ ECC QUAD CHANNEL MEMORY KIT (KVR21R15D4K4/128)

New product

128GB (4X32GB) DDR4 PC4-17000C15 2133MHZ ECC QUAD CHANNEL MEMORY KIT (KVR21R15D4K4/128)

More details

50 Items

$1,000.50

More info

PRODUCT INFORMATION:
128GB (4X32GB) DDR4 PC4-17000C15 2133MHZ ECC QUAD CHANNEL MEMORY KIT (KVR21R15D4K4/128)
Contrary to popular belief, server memory is not created equal. Kingston invests in the quality of its modules, resulting in high performance, stability and long-term reliability with Kingston ValueRAM.

Kingston is an ideal source for industry-standard server memory and is designed to JEDEC specifications. Ideal for in-house and white box servers and for those who know the exact technical specifications of the memory they need.

KVR21R15D4K4/128 is a kit of four 4G x 72-bit(32GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM) registered w/ parity, 2Rx4, ECC, memory module, based on thirty-six 2G x 4-bit FBGA components per module. Total kit capacity is 128GB. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical


Features:
- Functionality and operations comply with the DDR4 SDRAM datasheet
- 16 internal banks
- Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are available
- Data transfer rates: PC4-2133, PC4-1866, PC4-1600
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Supports ECC error correction and detection
- On-Die Termination (ODT)
- Temperature sensor with integrated SPD
- This product is in compliance with the RoHS directive.
- Per DRAM Addressability is supported
- Internal Vref DQ level generation is available
- Write CRC is supported at all speed grades
- CA parity (Command/Address Parity) mode is supported


Specification:
- CL(IDD): 15 cycles
- Power Supply: VDD=1.2V (1.14V to 1.26V)
- VDDQ: 1.2V (1.14V to 1.26V)
- VPP: 2.5V (2.375V to 2.75V)
- VDDSPD: 2.25V to 2.75V
- Row Cycle Time (tRCmin): 47.05ns(min.)
- Refresh to Active/Refresh Command Time 1x mode (tRFCmin) : 260ns(min.)
- Row Active Time (tRASmin): 33.00ns(min.)